Power amplifier input in the Dynacord mixer
Inputs Power Amp is used to connect the side device or mixers to the Dynacord device's power supply device. That is, use this input to use the device power supply independently.
Also, when using this input, no volume or power supply will affect this input. One thing some people do is connect the Mon outputs to this input.
And after the specon output, they receive the output device. The reason is to use a feedback filter in the audio output. Well, of course, this input only exists in PowerMate mixers.
At the top of these inputs is a master audio output that you can use to connect your device to an effector and feed the effector's output back into the mixer.
This will allow you to apply the desired effect to the output sound of the device by connecting an effector to your device if the Dynacord device does not have the desired sound effect (FX).
The power amplifier input, except for the above, will allow you to continue using the amplifier in case of mixer failure or noise in the mixer.